|
ETAC Product Guide
ETAC Private Stock
2oz. | 4oz. | 16oz. | 32oz. |
1oz. Sets | 2oz. Sets
A combination of transparent, opaque and flourescent colors homogenized in a revolutionary base for multi-surface airbrushing use. All colors are inter-mixable with each other and special effects can be added from our component product E.Fx 500 line.
Refer to tech sheet and color chart (right navigation sidebar.)
EFX 500 - Colors and Special FX Pigments
2oz. | 4oz. | 16oz. |
1oz. Sets | 2oz. Sets
All colors to include a growing list of special effects pigments.
24K Gold dispersion
Interference dispersion
Pearl dispersion
Flake base
Holographic Voodoo Dust Micro glitter dispersion works in ETAC Private Stock or in Extend-Air.
The usual mixing rate for these heavy bodied dispersions are 1-2 oz. per 8 oz. of Extend-Air or ETAC Private Stock. Maximum mix-in ratio of E.Fx is one part E.Fx to three parts private stock..
EFX 500 Translucent Base - Reduce-Air
2 oz. | 4oz. | 8oz. | 16oz.
A translucent base for mixing and creating endless color schemes for you particular project. Hard surface self cross-linking binder which accepts most solvent clears tested. Dries to a non-TAC finish. ETAC Private Stock may be used as sole toners which increase TAC. Pigment or Special Effects Pigments when used alone do not increase TAC. This base is compatible with all our products as is all our products are well suited for intermixing to achieve your specific end result on a variety of surfaces. Solvent top clears are suggested based on the substrate painted on when using EFX products for permanence since this is a water-based product and is subject to acidic alkaline attack.
Extend-Air
2 oz. | 4oz. | 16oz. | 32oz.
Our beefed up version of ETAC Private Stock base. Contains additional cross-linking materials as well as all the enhancements found in ETAC Multi-Substrate line of colors meaning you can reduce it with water to a water-color consistency. Can be used alone as a Top Binder prior to working on dark garments to seal the fabric as well as entrap fuss or over completed fabric art to add additional protection and finish. Heat set after drying @ 340 degrees F for 18 seconds. Iron hot as possible without scorching if no heat press is available by turning inside out or using wax paper to reduce drag.
Condition-Air
2 oz. | 4oz.
A super lubed surface modifying material used for several of our products. Reduces drying time, helps keeps seal clean and lubed, reduces surface tension phenomenon and can be used as a wash for cleaning your brushes between colors. Only drops per ounce are needed! This product has all the built-in enhancements needed to help you achieve maximum results in varying climates be it too cold or too hot. Works well for other color systems that you find are giving you problems such as tip drag and poor performance.
ETAC Process Pigments | $12.95 per fluid ounce.
| 
